ABM 3024ca Wraparound Bridge

179.00

The Professional Adjustable Wraparound with a Wide Intonation Range

ABM’s lightweight Adjustable Wraparound is a must-have for Gibson Melody Maker and LP Junior fans. Each of the saddles are individually adjustable and it is possible to further extend the entire intonation range with the use of 2 allen screws, located at the sides of the bridge. As far as wraparound bridges go, you will be hard-pressed to find a more flexible product.

Important: The 5/16″ bolt/sleeve combination is required by the US standard. This means that if your guitar was made in the US, the bridge will most likely fit. If you own an Asian guitar (Epiphone), this product won’t fit.

The ABM 3024 Wraparound can be used either for an angled or for a straight installation.

FEATURES:

String Spacing: 52mm,

Pin spacing: 82mm,

Radius: 12″,

Material: Aluminum,

Finish: Chrome

1 na zalogi

Opis

ABM’s lightweight Adjustable Wraparound is a must-have for Gibson Melody Maker and LP Junior fans. Each of the saddles are individually adjustable and it is possible to further extend the entire intonation range with the use of 2 allen screws, located at the sides of the bridge. As far as wraparound bridges go, you will be hard-pressed to find a more flexible product.

Important: The 5/16″ bolt/sleeve combination is required by the US standard. This means that if your guitar was made in the US, the bridge will most likely fit. If you own an Asian guitar (Epiphone), this product won’t fit.

The Wraparound 3024 can be used either for an angled or for a straight installation.

FEATURES:

String Spacing: 52mm,

Pin spacing: 82mm,

Radius: 12″,

Material: Aluminum,

Finish: Chrome

Additional goodies:
– 5/16″ bolts with large heads and sockets,
– Hex wrench and
– Protector box.

Normally, you shouldn’t replace the drive-in sleeves of existing guitars. If you do not have an appropriate tool, this action could prove to be difficult. Additionally, the sleeves are usually lacquered in, so when removing sleeves the paint could tear. Sleeves vary depending on the manufacturer of the guitar greatly in outside diameter (10 to 13 mm), so we ask you to first ensure compatibility with your instrument. ABM’s bushings have a standard outer diameter of 13mm.

Please always use ABM studs for ABM Bridges! Bolts from third parties may cause problems.

Mnenja

Zaenkrat še ni mnenj.

Bodi prvi ocenjevalec “ABM 3024ca Wraparound Bridge”
Close ✕